Linksys Support
- Welcome Back,
- Not
- ?
- Sign In
- My Support
- Sign In
Register Your Products Now
Register your Linksys product to stay informed about product updates and warranty information.
Dual-Band Wireless Access Point (WAP55AG)
Get Connected--to the Internet and each other. Surf, store, stream and share. A Linksys by Cisco device is an essential part of your home network.
Support Sections
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
- Overview
- Guide Me
- FAQs
- Product Information
- Downloading product manuals and firmware updates for Linksys access points
- Setting up your access point
- Configuring an Access Point as a Wireless Repeater
- Configuring an Access Point as a Wireless Bridge
- Configuring an Access Point as an Access Point
- Configuring an Access Point in Access Point Client Mode
- Connecting an access point to a wireless router
- Checking the wireless settings on a Linksys access point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys access point
- Setting-Up Wireless Security on an Access Point
- Advanced Troubleshooting
- Accessing the access point’s web-based setup page
- Encountering difficulties in accessing the access point’s web-based setup page
- Upgrading the Linksys Wireless-G Access Point's Firmware
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Product Information
- Downloading product manuals and firmware updates for Linksys access points
- Setting up your access point
- Configuring an Access Point as a Wireless Repeater
- Configuring an Access Point as a Wireless Bridge
- Configuring an Access Point as an Access Point
- Configuring an Access Point in Access Point Client Mode
- Connecting an access point to a wireless router
- Checking the wireless settings on a Linksys access point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys access point
- Setting-Up Wireless Security on an Access Point
- Connecting a Linksys Access Point Using Mac OS X
- Advanced Troubleshooting
- Accessing the access point’s web-based setup page using Mac computer
- Encountering difficulties in accessing the access point’s web-based setup page
- Upgrading the Linksys Wireless-G Access Point's Firmware
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Forums
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few months ago, I lost...
-
I have 2 AP WAP55AG Version 2. Can I connect this two acc...
From what I could see in the user manual I don't see any reason why you can't.Setup both devices to have different IP addresses192.168.1.1/255.255.255.0192.168.1.2/255.255.255.0 Point...
-
WAP55AG connected to cable modem
I think what you are actually trying to ask is that if you connect the WAP55G to your moden can you connect your computers...
-
compatability WAP55AG with WRE54G ??
WAPs may communicate ONLY with fellow WAPs also. What u are doing may work or may not work. You may...
-
WAP55AG : Lost product CD
Hi. connect AP (Access Point) to the computer, setup static IP on computer e.g. 192.168.1.10 Subnet Mask 255.255.255.0 Default...
-
WAP55AG
Connect the Access Point to the Computer ....Access Setup page of the sameConfigure the wireless settings same as in the...
-
WAP55AG
Try turning od any firewall. Throw away the setup CD Reset the AP Access the AP via your web browser with...
-
WAG320N Static Route
Again: the WAG320N does not support this kind of setup. It does not allow you to define directly delivered static routes...
-
E4200 Static IP Issues
Haha! Oh man! Late nights just aren't good. I realized my error in the morning. I had previous used the Advanced Routing...
-
IP address? DHCP?
The AM200 is router with integrated modem. That's the main problem. I would recommend only to use a single router.Two recommended...
-
Problem: 13-digit WEP key
I finally figured it out on my own, so this can be marked as solved. I was assuming the 13-digit WEP code was a hex...
-
Cannot renew ip address
Un-install the adapter software/linksys monitor and install only the drivers... Remove the Linksys Adapter and un-install...
-
Monitoring channels/signal strength
This generally requires two devices. One transmitting a signal and one receiving the signal. Until now we have a WRT54GL....
- Downloads
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your product. The serial number is located right underneath the model number. In this example, the model number of the device is M20.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
E-Series
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Silver
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
-
Wireless Routers with Voice Ports
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
-
Wireless VPN Routers
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PC Card or Card Bus
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PCI Adapter
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
-
USB Wireless Adapter
Step 1:
Look for the sticker around the device.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
-
PCI Adapters
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
SE Switches
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
- Videos
- Live Chat
Guide Me
Get quick solutions and troubleshooting tips.
Hot Topics
Frequently asked questions
Frequently Asked Questions for various Operating Systems
Forums
Downloads
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
Firmware
Ver.1.01
Download
946 KB(Firmware)
Guides and Information
Firmware
10/14/2003
Ver.1.07
Download
1.66 MB(Firmware)
Release Notes
Guides and Information
How to find your model or serial number
To find model or serial numbers, choose your device below.
VALET HOTSPOTS
WIRELESS ROUTERS AND ACCESS POINTS
WIRED ROUTERS
WIRELESS ADAPTERS
WIRED ADAPTERS
SWITCHES
MEDIA HUB
WIRELESS HOME AUDIO
Forums
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few...
-
I have 2 AP WAP55AG Version 2. Can I connect this two acc...
From what I could see in the user manual I don't see any reason why you can't.Setup both devices to have...
-
WAP55AG connected to cable modem
I think what you are actually trying to ask is that if you connect the WAP55G to your moden can you connect...
Guide Me
Get quick solutions and troubleshooting tips.
Frequently asked questions
License Agreement
Accept
Do Not Accept