Linksys Support
- Welcome Back,
- Not
- ?
- Sign In
- My Support
- Sign In
Register Your Products Now
Register your Linksys product to stay informed about product updates and warranty information.
Wireless-N Access Point (WAP610N)
• Add high-speed Wireless-N to your existing network
• The perfect partner for wireless video streaming
• Operates in the 2.4 and 5 GHz radio bands -- choose the one with least congestion in your area
Support Sections
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
- Overview
- Guide Me
- FAQs
- Advanced Troubleshooting
- Accessing the access point’s web-based setup page
- Encountering difficulties in accessing the access point’s web-based setup page
- Upgrading the firmware of WAP610N
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Product Information
- WAP610N Frequently Asked Questions
- Getting to know the WAP610N
- Setting up your access point
- Configuring an Access Point as an Access Point
- Connecting an access point to a Linksys wireless router
- Checking the wireless settings on a Linksys access point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys access point
- Setting-Up Wireless Security on an Access Point
- Product Information
- WAP610N Frequently Asked Questions
- Getting to know the WAP610N
- Setting up your access point
- Configuring an Access Point as an Access Point
- Connecting an access point to a Linksys wireless router
- Checking the wireless settings on a Linksys access point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys access point
- Setting-Up Wireless Security on an Access Point
- Connecting a Linksys Access Point Using Mac OS X
- Advanced Troubleshooting
- Accessing the access point’s web-based setup page using Mac computer
- Encountering difficulties in accessing the access point’s web-based setup page
- Upgrading the firmware of WAP610N
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Forums
-
Have E4200 need to expand wireless signal, get a 2nd E4200?
Generally, a router is used to create a new network, not to extend an existing one. The "correct" device to use...
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few months ago, I lost...
-
WAP610N updating firmware problem
reset it and attempt another firmware flash. make sure that you have a computer (with a static IP) wired to the AP directly....
-
WAP610N has index 1 only on WEP
You can't select a different transfer key and there is not really a purpose doing so. WEP is highly insecure and choosing...
-
WAP610N Very Slow in N Mode
1. How did you check exactly for interference of other access points?2. Try 20 MHz band instead.
-
Access Point
The WAP610N is an access point. It's not a repeater nor a wireless bridge.Get a wireless adapter or a wireless bridge.
-
Tracking Intruders
You may also put a unique SSID name, then disable the SSID broadcast. That should prevent further intrusion?.
-
Tracking Intruders
Set your wireless security to WPA2 with AES and a strong passphrase. If you do that, there are no intruders. There are only...
-
WAG320N Static Route
Again: the WAG320N does not support this kind of setup. It does not allow you to define directly delivered static routes...
-
E4200 Static IP Issues
Haha! Oh man! Late nights just aren't good. I realized my error in the morning. I had previous used the Advanced Routing...
-
IP address? DHCP?
The AM200 is router with integrated modem. That's the main problem. I would recommend only to use a single router.Two recommended...
-
Problem: 13-digit WEP key
I finally figured it out on my own, so this can be marked as solved. I was assuming the 13-digit WEP code was a hex...
-
Cannot renew ip address
Un-install the adapter software/linksys monitor and install only the drivers... Remove the Linksys Adapter and un-install...
-
Monitoring channels/signal strength
This generally requires two devices. One transmitting a signal and one receiving the signal. Until now we have a WRT54GL....
-
Adding another computer to my wireless connection
First of all, in the router, give your network a unique SSID. Do not use linksys. If you are using linksys you may...
- Downloads
-
E-Series
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Silver
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Wireless Routers with Voice Ports
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Wireless VPN Routers
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PC Card or Card Bus
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PCI Adapter
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
USB Wireless Adapter
Step 1:
Look for the sticker around the device.Step 2:
You should find the model number on the sticker. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PCI Adapters
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
SE Switches
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
- Videos
- Live Chat
Guide Me
Get quick solutions and troubleshooting tips.
Hot Topics
Frequently asked questions
Frequently Asked Questions for various Operating Systems
Forums
Downloads
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
Firmware
04/16/2012
Ver.v1.0.04 (build 7)
Download
3.21 MB(Firmware)
Release Notes
Installation CD Image
07/30/2009
Download
69.0 MB(Installation CD Image)
GPL Code Center
How to find your model or serial number
To find model or serial numbers, choose your device below.
WIRELESS ROUTERS AND ACCESS POINTS
WIRED ROUTERS
WIRELESS ADAPTERS
WIRED ADAPTERS
SWITCHES
MEDIA HUB
WIRELESS HOME AUDIO
Forums
-
Have E4200 need to expand wireless signal, get a 2nd E4200?
Generally, a router is used to create a new network, not to extend an existing one. The "correct"...
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few...
-
WAP610N updating firmware problem
reset it and attempt another firmware flash. make sure that you have a computer (with a static IP) wired...
Guide Me
Get quick solutions and troubleshooting tips.
Frequently asked questions
- Accessing the access point’s web-based setup page
- Encountering difficulties in accessing the access point’s web-based setup page
- Upgrading the firmware of WAP610N
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
License Agreement
Accept
Do Not Accept