Register now, enter your information.
Required *
According to our records you are a registered user.
Please enter your password to continue.
Register your Linksys product to stay informed about product updates and warranty information.
• Wireless-N (2.4 GHz) router & DSL modem
• Fast Ethernet 3-port switch
• High speed up to 300 Mbps
• Works with DSL & cable ISPs
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
Get quick solutions and troubleshooting tips.
Frequently Asked Questions for various Operating Systems
I reset the router to factory default then I updated the Firmware to the newsiest version to Ver.2.0.01 (Build 4) which...
Hi running8 and welcome to the forums!
Please click the link for instructions:
Setting-Up the Wireless Settings...
Yes, just login to the Admin account and (without knowing which model you have) under the security settings, select WPA2...
Hi handelgame,
From the looks of it, it sounds like a Windows problem. Maybe your Firewall or Antivirus programs are...
Access the setup page of router. ... using http://192.168.1.1 ...leave username blank in password use admin ....Click on...
Hi Kukac,
It is neither softwary nor hardwary possible to change the Annex version of the Gateway.
The Annex B is...
Cannot predict as of now, however as we are aware that in future most of the ISPs will upgrade their network to IPv6, so...
Finally figured out that it is an issue with the ports being blocked from my workplace, which is where I was trying to connect...
Not possible.1. Unless you forward a port the server can't be accessed anyway.2. If you forward a port to the server set...
Definitely! That's the usual practice, if you have devices that needs port forwarding you set static IP address on it. Just...
I had a similar problem, and it turned out to be because I didn't create a new profile in the Firewall in AVG 8.5 Internet...
The port forwarding is under the Applications Gaming then Port Range Forward. The application filed can be anything you...
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
03/18/2013
Ver.2.0.05 (Build 2) Annex A
Download
7.55 MB(Firmware)
Release Notes
03/18/2013
Ver.2.0.05 (Build 2) Annex B
Download
7.55 MB(Firmware)
Release Notes
11/17/2011
Ver.1.4.11320.1
Download
18.7 MB(Cisco Connect Setup Software for PC)
Release Notes
11/17/2011
Ver.1.4.11320.1
Download
32.4 MB(Cisco Connect Setup Software for Mac)
Release Notes
03/18/2013
Ver.2.0.05 (Build 2) Annex A
Download
7.55 MB(Firmware)
Release Notes
03/18/2013
Ver.2.0.05 (Build 2) Annex B
Download
7.55 MB(Firmware)
Release Notes
11/17/2011
Ver.1.4.11320.1
Download
18.7 MB(Cisco Connect Setup Software for PC)
Release Notes
11/17/2011
Ver.1.4.11320.1
Download
32.4 MB(Cisco Connect Setup Software for Mac)
Release Notes
To find model or serial numbers, choose your device below.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look for the sticker around the device.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.
NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
I reset the router to factory default then I updated the Firmware to the newsiest version to Ver.2.0.01...
Hi running8 and welcome to the forums!
Please click the link for instructions:
Setting-Up the...
Yes, just login to the Admin account and (without knowing which model you have) under the security settings,...
Get quick solutions and troubleshooting tips.