Register now, enter your information.
Required *
According to our records you are a registered user.
Please enter your password to continue.
Register your Linksys product to stay informed about product updates and warranty information.
• Wireless-N (2.4 GHz)
• Fast Ethernet (10/100) Bridge Port
• Extended range with multiple antennas
• Flexible wall or desktop placement options
• Also works as wireless bridge for wired device
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
Get quick solutions and troubleshooting tips.
Frequently Asked Questions for various Operating Systems
Up till now you tried installing the RE1000 with the help of the CD. So, try to install the RE1000 manually. There are four...
Many. But you don't want to do that because each RE1000 will interfere with each other and of course as repeater you only...
You can do MAC filtering, indeed. But because it is a proxy repeater, you have to define both the global MAC of the client...
Well you cannot disable the SSID Broadcast for RE1000, However yes you can use the RE1000 as with the Ethernet connection...
My e4200 v2 arrived today to replace my v1. I installed it along with a re1000 range expander for our big home. Works pretty...
I have finally found the answer. It's probably happening to thousands of users. I use Norton 360 and when I turned the firewall...
cslepage wrote:I am having a setup problem with the RE1000. When I plug it in, my laptop is able to see it, and I'm able...
I think it is normal because of the other wireless networks on your apartment. Though you're using a different, they may...
Yes, this wireless-N extender lets you repeat the wireless signal of any access point or router to supply Internet connectivity...
Can the RE1000 connect to the network via the Ethernet jack? We've got a big house with plaster/metal lath walls and it...
Sounds like defective hardware. Need to verify if you are connecting to the RE1000 or the router. Also need to verify if...
As you mentioned in your post that if you connect the computer with the router's network it connects with good signals but...
Correct. The RE1000 repeats wireless signals. This increases the amount of wifi traffic by at least 2 leaving you with less...
Try first configuring the expander with WEP/WPA disabled on your router. Make sure as well that you dont have wireless MAC...
I upgraded the firmware to the router (I thought it was up to date and was not), then reset the Extender. This time it set...
Well its compatibilty issue.... Because the router that you have thats a wireless N technology router and the range expander...
The E4200 router flashing logo light issue is now fixed (via the latest firmware 1.0.03), which is great news.The bad news...
My RE1000 provides a great signal in distant locations (relative to my E4200 wireless router's location) where my E4200's...
I do see two different phases of the issues that you are facing in your network on the devices that you connect wirelessly........
I just installed an RE1000 and it seems to work fine with all my devices (laptops, Tivo, ipods, ipad, PS3, Wii and Toshiba...
Finally figured out that it is an issue with the ports being blocked from my workplace, which is where I was trying to connect...
Not possible.1. Unless you forward a port the server can't be accessed anyway.2. If you forward a port to the server set...
Definitely! That's the usual practice, if you have devices that needs port forwarding you set static IP address on it. Just...
I had a similar problem, and it turned out to be because I didn't create a new profile in the Firewall in AVG 8.5 Internet...
The port forwarding is under the Applications Gaming then Port Range Forward. The application filed can be anything you...
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
03/01/2013
Ver.2.0.00.033
Download
3.32 MB(Firmware)
Release Notes
02/28/2013
Ver.1.1.13053.0
Download
10.4 MB(Extender Setup for PC)
Release Notes
02/28/2013
Ver.1.1.13053.0
Download
14.0 MB(Extender Setup for Mac)
Release Notes
02/13/2012
Ver.1.0.02 (Build 1)
Download
2.92 MB(Firmware)
Release Notes
03/21/2013
Ver.1.1.13072.0
Download
9.21 MB(Extender Setup for PC)
Release Notes
03/21/2013
Ver.1.1.13072.0
Download
13.2 MB(Extender Setup for Mac)
Release Notes
02/13/2012
Ver.1.0.02 (Build 1)
Download
2.92 MB(Firmware)
Release Notes
03/21/2013
Ver.1.1.13072.0
Download
9.21 MB(Extender Setup for PC)
Release Notes
03/21/2013
Ver.1.1.13072.0
Download
13.2 MB(Extender Setup for Mac)
Release Notes
To find model or serial numbers, choose your device below.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look for the sticker around the device.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.
NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Up till now you tried installing the RE1000 with the help of the CD. So, try to install the RE1000 manually....
Many. But you don't want to do that because each RE1000 will interfere with each other and of course...
You can do MAC filtering, indeed. But because it is a proxy repeater, you have to define both the global...
Get quick solutions and troubleshooting tips.