Register now, enter your information.
Required *
According to our records you are a registered user.
Please enter your password to continue.
Register your Linksys product to stay informed about product updates and warranty information.
• Save on wiring costs - no wired connection to your network
• Easy installation - one-touch auto configuration
• Expand wireless network coverage or extend the signal into hard-to-reach areas
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
Get quick solutions and troubleshooting tips.
Frequently Asked Questions for various Operating Systems
A family member just bought this unit and could not get the auto site survey to work. I believe I found this issue and an...
Wireless-N and wireless-G are two completely different signal frequencies. You may be able to use your range expander on...
The main wireless system of your network is your Router, which is resposible for broadcasting the signal with good strength.Range...
Yes, you can use two Range Expander's with your existing ADSL Gateway, but using 2 Range Expanders data transfer rate will...
Whats the Distance between your Router - WRE54G and Computer. Make sure the Distance between your Router and WRE54G not...
Hello and welcome to the forums. Initially, I might have tried a power cycle of your network, turn router off, unplug WRE,...
Try to adjuct the wireless parameters on the router and upgrade the firmware
1. Throw out CD that came with it.2. Plug the extender into a wall outlet, then into your router via the...
if you are using any Windows operating system, click on the Start button on the bottom of your monitor and select Run.type...
thank you v.much for taking the time to reply Turns out I got them to work together easily... updated the WAG54GS firmware...
WAPs may communicate ONLY with fellow WAPs also. What u are doing may work or may not work. You may...
Hi running8 and welcome to the forums!
Please click the link for instructions:
Setting-Up the Wireless Settings...
It is not recommended to us e WRE54G wireless adapter to use with wireless N router.Try changing the wireless channel on...
As you already has a Wireless Router (WAG54G) router, you dont need an WAP54G access point, Just you need to go for a WRE54G...
a range expander would probably work to extend the wireless coverage of your network, but it only runs at B/G signal. it...
You don't need to change the IP address of your router.The default IP address of WRE54G is 192.168.1.240.Connect the WRE...
Ok, I resolved this problem! I deleted the wireless network connection for my home network in Vista and created a new one...
When entering WEP information for this device you may notice that the range expander is asking for the WEP key in hex (for...
Okay, before I do this, let me clarify what I need, because i reread my original post and I must have been super tired because...
I'm trying to configue my wre54g range expander to work with my new wrt610n.I configured the router to perform dual signals...
Finally figured out that it is an issue with the ports being blocked from my workplace, which is where I was trying to connect...
Not possible.1. Unless you forward a port the server can't be accessed anyway.2. If you forward a port to the server set...
Definitely! That's the usual practice, if you have devices that needs port forwarding you set static IP address on it. Just...
I had a similar problem, and it turned out to be because I didn't create a new profile in the Firewall in AVG 8.5 Internet...
You have to be on the same workgroup.You have to turn on Network Discovery and file sharing in your new computer.
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
12/05/2006
Ver.3.0.0.21
Download
2.19 MB(Setup Wizard)
03/17/2010
Download
466 KB(Firmware Upgrade Instructions)
03/30/2005
Ver.2.01.12
Download
640 KB(Firmware)
03/31/2004
Ver.2.1.1.8
Download
1.38 MB(Setup Wizard)
03/17/2010
Download
466 KB(Firmware Upgrade Instructions)
11/08/2005
Ver.1.06.05
Download
1.51 MB(Firmware)
Release Notes
01/12/2005
Ver.1.05.08
Download
1.38 MB(Firmware)
01/12/2005
Download
3.89 MB(Setup Wizard)
To find model or serial numbers, choose your device below.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look for the sticker around the device.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.
NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
A family member just bought this unit and could not get the auto site survey to work. I believe I found...
Wireless-N and wireless-G are two completely different signal frequencies. You may be able to use your...
The main wireless system of your network is your Router, which is resposible for broadcasting the signal...
Get quick solutions and troubleshooting tips.