Register now, enter your information.
Required *
According to our records you are a registered user.
Please enter your password to continue.
Register your Linksys product to stay informed about product updates and warranty information.
• Simultaneous Dual-Band N (2.4 & 5 GHz)
• Gigabit Ethernet 4-port switch
• Fast speed up to 300 + 300 Mbps
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
Get quick solutions and troubleshooting tips.
Frequently Asked Questions for various Operating Systems
"i do see a lot of potential with the cisco connect cloud. i am currently looking into an app called Block the Bad...
Hi, Good day! It is a normal behavior that if you disable the NAT on the router the computer would lose connection. NAT...
Thanks for your help. There was a miinor update to the firmware 1.1.38.138880 that the Cloud wouldn't pick up in automatic...
I've had the same thing happen. I'm in US. Appears to be small bug. You have to access via www.ciscoconnectcloud.com.If...
Go To http://homesupport.cisco.com/ en-us/wireless/linksys/E3000 Select downloads, choose model number (only one to choose...
I did think of one other thing. Maybe the two devices that can't get Internet are using a proxy and your ISP is blocking...
Was getting setup to give that a try, and lo and behold when I connected to my router this time I was presented with the...
The computers connected to the guest network will NOT be able to see the computers connected to your home network. Just...
The app is available in Canada. Go to the app store and search for "Cisco Connect Express" and you will see it....
Why on earth do you want to forward port 53???Port 53 is DNS. It is how host names are resolved to IP addresses. It's an...
I've searched everywhere and tried the suggestions for other models but cannot find how to change username admin to something...
For home routers there is very little you can do about DoS. If your connection is flooded or "breaks down", well,...
It is my hope that Cisco with Apple will make the Connect Express app available to everyone not only who live in the USA,...
I have been using OpenDNS for a long time, and I just got the Linksys E3000. When I tried to change the settings to add...
I have a Linksys E1000, firmware 2.1.02 Build 5. Everything works fine. I would like to be able to turn off and turn on...
I am adding a new laptop to my home network and will stop using my old one. The old one has Cisco Connect on it. How can...
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
11/19/2012
Ver.1.1.39.145204
Download
10.5 MB(EA Series Linksys Smart Wi-Fi Firmware)
Release Notes
03/09/2012
Ver.1.0.14.129982
Download
12.3 MB(Classic EA Series Cisco Connect Firmware)
Release Notes
10/31/2012
Ver.2.0.12304.0
Download
17.6 MB(EA Series Linksys Smart Wi-Fi Setup Software for PC)
Release Notes
10/31/2012
Ver.2.0.12304.0
Download
28.6 MB(EA Series Linksys Smart Wi-Fi Setup Software for Mac)
Release Notes
10/11/2012
Ver.1.4.12284.0
Download
20.1 MB(Classic EA Series Cisco Connect Setup Software for PC)
Release Notes
10/11/2012
Ver.1.4.12284.0
Download
33.9 MB(Classic EA Series Cisco Connect Setup Software for Mac)
Release Notes
To find model or serial numbers, choose your device below.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look for the sticker around the device.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.
NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
"i do see a lot of potential with the cisco connect cloud. i am currently looking into an app called...
Hi, Good day! It is a normal behavior that if you disable the NAT on the router the computer would lose...
Thanks for your help. There was a miinor update to the firmware 1.1.38.138880 that the Cloud wouldn't...
Get quick solutions and troubleshooting tips.