Register now, enter your information.
Required *
According to our records you are a registered user.
Please enter your password to continue.
Register your Linksys product to stay informed about product updates and warranty information.
• Great for larger homes with many users
• Fast Wireless-N connectivity frees you to do more around your home
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
Get quick solutions and troubleshooting tips.
Frequently Asked Questions for various Operating Systems
Well after spending a good half hour arguing with a first level tech and then holding for another 20-30 min, I finally got...
You can only listen on the 5 GHz band with a 5 GHz band radio. Both adapters don't have one. You won't see any network on...
On a modem setup, you'd normally connect a router instead of an access point (WAP54GX). If you're planning on connecting...
It actually depends. If you play online gaming using your PC/ console wired to your router, then tweaking the MTU settings...
Just do as the picture shows below and then assign that ip address to your xbox 360.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave...
After wasting my time with many attempts, I FINALLY have it working! It was so simple and quick. It took less than 5 minutes.
Do...
Just bought a WRT160N.Is it possible to set it up to use DHCP but to input manual DNS server info?I'd like to use OpenDNS...
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few months ago, I lost...
Uncheck all options under Port Triggering and try Port Range Forwarding... Port Range Forwarding - Application...
If you have been experienceing problems connection an XBox via the wireless, here si the fix for this problem. Log...
After every firmware upgrade you must hard reset the router and reconfigure it. Press and hold the reset button for...
If all 254 IP addresses (192.168.1.1) are handed out on my network, will it stop handing out IPs -or- will it start to hand...
Normally a firmware downgrade should not crash the router, maybe you have WRT160N v1 or v3 and you tried downgrading the...
I have troubles getting magic packet UDP traffic getting through, due to broadcast incapability. Any one who have a work...
*THIS ISSUE HAS BEEN SOLVED* I solved this issue after it seemed like I tryed everything but nothing worked....
Just wanted to provide everyone with an update on this. A few months ago I switched my DNS from my ISP over to Google DNS....
As your Internet Service Provider is DSL ,You have to convert the modem into the Bridge Mode.After converting the modem...
Well, these static IP settings don't make sense. You can't just set an IP address. WAN IP settings require IP address, subnet...
Click on Start Go to Run and type 192.168.1.1 and hit enter, and it should prompt you for the Username and Password, in...
Re 1. Yes, you can use your second WRT and set it up as second access point for your network. First, unplug the second WRT...
binky wrote:1: The WRT160N Router's Ethernet Ports are of 10/100Mbps speed, its not an Gigabit Router. If you need a Gigabit...
I assume that when you close your laptop, the laptop goes into a "sleep", "suspend" , "hibernate"...
I have now had 4 chat sessions with Linksys support. Two times they have ended with a promise that they would get back within...
If by mistake I have attempted to upgrade the firmware my router "WRT610N" via my wireless laptop and...
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
07/12/2010
Ver.3.0.03 Build 3
Download
3.31 MB(Firmware)
Release Notes
Download
(Firmware Upgrade Instructions)
Download
174 MB(Installation CD Image)
11/11/2008
Ver.2.0.01
Download
3.31 MB(Firmware)
Release Notes
Download
(Firmware Upgrade Instructions)
05/14/2008
Ver.4.9.8101
Download
6.78 MB(Setup Wizard)
05/14/2008
Ver.4.9.8101
Download
4.93 MB(Setup Wizard)
Ver.1.52.0
Download
2.89 MB(Firmware)
Download
(Firmware Upgrade Instructions)
05/14/2008
Ver.4.9.8101
Download
6.78 MB(Setup Wizard)
05/14/2008
Ver.4.9.8101
Download
4.93 MB(Setup Wizard)
To find model or serial numbers, choose your device below.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look for the sticker around the device.
Step 2:
You should find the model number on the sticker. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.
NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Well after spending a good half hour arguing with a first level tech and then holding for another 20-30...
You can only listen on the 5 GHz band with a 5 GHz band radio. Both adapters don't have one. You won't...
On a modem setup, you'd normally connect a router instead of an access point (WAP54GX). If you're planning...
Get quick solutions and troubleshooting tips.