Register now, enter your information.
Required *
According to our records you are a registered user.
Please enter your password to continue.
Register your Linksys product to stay informed about product updates and warranty information.
• Wireless-N (2.4 GHz)
• Fast Ethernet (10/100 Mbps) 4-port switch
• High speed up to 300 Mbps
• IPv4 / IPv6 dual stack support
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
Get quick solutions and troubleshooting tips.
Frequently Asked Questions for various Operating Systems
Open Cisco Connect then click Guest access. The password is displayed under the Password header. To go...
I had the same problem. It was resolved early last week. It is a problem in the Cisco database If:You have latest...
As I wrote before: reinstall the computer. It has a serious problem. A computer which shows BSOD has a serious problem....
For home routers there is very little you can do about DoS. If your connection is flooded or "breaks down", well,...
Hi please follow the instructions from the link below.
Checking the password for the guest access network
Hi Wes,the app its already available for all.
Yes, it possible to disable and later on enable wireless through Cisco Connect. Cisco Connect will still ...
Go To http://homesupport.cisco.com/ en-us/wireless/linksys/E3000 Select downloads, choose model number (only one to choose...
I just purchased the E3000. I am trying to set up my laptop with Cisco Connect software but my CD seems to be broken...
The app is available in Canada. Go to the app store and search for "Cisco Connect Express" and you will see it....
Why on earth do you want to forward port 53???Port 53 is DNS. It is how host names are resolved to IP addresses. It's an...
For home routers there is very little you can do about DoS. If your connection is flooded or "breaks down", well,...
Have any of you find a solution yet? I'm having the exact same problem. SO frustrating!
It will not show-up automatically. If the computer is not listed, click Add to select the computer. You can also check the...
It is my hope that Cisco with Apple will make the Connect Express app available to everyone not only who live in the USA,...
I have been using OpenDNS for a long time, and I just got the Linksys E3000. When I tried to change the settings to add...
I have a Linksys E1000, firmware 2.1.02 Build 5. Everything works fine. I would like to be able to turn off and turn on...
I am adding a new laptop to my home network and will stop using my old one. The old one has Cisco Connect on it. How can...
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
11/05/2012
Ver.v1.0.04 (Build 1)
Download
6.79 MB(Firmware)
Release Notes
09/20/2012
Ver.1.4.12263.1
Download
19.9 MB(Cisco Connect Setup Software for PC)
Release Notes
09/20/2012
Ver.1.4.12263.1
Download
33.4 MB(Cisco Connect Setup Software for Mac)
Release Notes
To find model or serial numbers, choose your device below.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
Step 1:
Look at the side panel of the router when it is standing vertically.
Step 2:
You should find the model number on the sticker. Please see the example.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please see the example.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
Step 1:
Look for the sticker around the device.
Step 2:
You should find the model number on the sticker. Please see the example.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.
Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Look at the top of the device.
Step 2:
The model number should be found under the CISCO logo.
Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.
NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 1:
Flip the device over.
Step 2:
You should find the model number on the sticker underneath the device. Please see the example.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.
NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Open Cisco Connect then click Guest access. The password is displayed under the Password header. To...
I had the same problem. It was resolved early last week. It is a problem in the Cisco database...
As I wrote before: reinstall the computer. It has a serious problem. A computer which shows BSOD has...
Get quick solutions and troubleshooting tips.