Linksys Support
- Welcome Back,
- Not
- ?
- Sign In
- My Support
- Sign In
Register Your Products Now
Register your Linksys product to stay informed about product updates and warranty information.
Wireless-G Access Point (WAP54G)
• Give your wired network wireless connectivity
• Push-button for easy setup and configuration
• 128-bit security encryption, access filtering
Support Sections
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
- Overview
- Guide Me
- FAQs
- Product Information
- Downloading product manuals and firmware updates for Linksys access points
- Getting to Know the WAP54G v1
- Setting up your access point
- Configuring an Access Point as a Wireless Repeater
- Configuring an Access Point as a Wireless Bridge
- Configuring an Access Point as an Access Point
- Configuring an Access Point in Access Point Client Mode
- Connecting an access point to a wireless router
- Checking the wireless settings on a Linksys access point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys access point
- Setting-Up Wireless Security on an Access Point
- Advanced Troubleshooting
- Accessing the access point’s web-based setup page
- Encountering difficulties in accessing the access point’s web-based setup page
- Upgrading the Linksys Wireless-G Access Point's Firmware
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Product Information
- Downloading product manuals and firmware updates for Linksys access points
- Getting to Know the WAP54G v1
- Setting up your access point
- Configuring an Access Point as a Wireless Repeater
- Configuring an Access Point as a Wireless Bridge
- Configuring an Access Point as an Access Point
- Configuring an Access Point in Access Point Client Mode
- Connecting an access point to a wireless router
- Checking the wireless settings on a Linksys access point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys access point
- Setting-Up Wireless Security on an Access Point
- Connecting a Linksys Access Point Using Mac OS X
- Advanced Troubleshooting
- Accessing the access point’s web-based setup page using Mac computer
- Encountering difficulties in accessing the access point’s web-based setup page
- Upgrading the Linksys Wireless-G Access Point's Firmware
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Forums
-
WAP54G as range expander for E4200
1. You have to run a wire between both and then you can use the WAP54G as second access point.2. The WAP54G only repeats...
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few months ago, I lost...
-
Update WAP54G Firmware
Before you download the firmware for your WAP54G you need to be sure whats version of WAP54G you are having. As the Current...
-
WAP54G help
Read this. You will need install the latest firmware to ensure WPA security works properly. It can be downloaded form...
-
WAP54G antenna
I don't recommend using the signal strength indicator on your client as a reference. Use a product called NetStumbler....
-
Transmit power of the WAP54G version 3.1
This is the only third part firmware that I am aware of for the WAP54G V3.x that will have the function you are looking...
-
No backup for WAP54G?
Under the Administration tab you have the option for Backup and Restore You can use that to Backup your Access Point...
-
WAP54G
Well the correct way of doing this is to use a router, but it is not required. If you are only wanting to use your...
-
WAP54G Access Point unable to connect to more than one PC at ...
First of all... this model number you mentioned is NOT A ROUTER... its a plain access point. You probably only have access...
-
Router as Repeater
Linksys routers don't operate as repeater.You can only use a WAP54G as repeater for a WRT54G.
-
WAP610N Very Slow in N Mode
1. How did you check exactly for interference of other access points?2. Try 20 MHz band instead.
-
Wireless-G Access Point WAP54G & Thompson SpeedTouch ST585
I cannot for the life of me get this unit to work. I am trying to create a access point to a non-pc device a FTA receiver....
-
WAP54G on Sky router
Hi there. Hi. I have a linksys WAP54G access Point set up on a sky broadband network to widen the range. The access...
-
Wireless USB Stick and WAP54G Access Point
Wickid PCTech wrote:G2TEGG wrote:First of all, Im new here so be nice to the newbie!! LOLAnyways, I recently moved into...
-
WAG54G on ADSL, Wireless Coverage
As you already has a Wireless Router (WAG54G) router, you dont need an WAP54G access point, Just you need to go for a WRE54G...
-
WAP54GX-> WAP54Gv2-> WAP54Gv2 woes
The problem is the wap54gx does not support repeater mode . Your able to connect 1 wap54g to the gx because the wap54g supports...
-
Connecting WRT120N wireless router and WAP54G wireless access...
You can actually set up WAP54G as a wireless bridge (the setup you were referring to), but a WAP54G will only bridge a WRT54G...
-
Tracking Intruders
You may also put a unique SSID name, then disable the SSID broadcast. That should prevent further intrusion?.
-
WAP54G LAN port support wired computer connection when set up as...
no. if it's set up as a repeater, then it's basically a "stand-alone" device with nothing connected to it. if...
-
Tracking Intruders
Set your wireless security to WPA2 with AES and a strong passphrase. If you do that, there are no intruders. There are only...
-
Re-setting up my network - just need some tips
1. establish the internet connection first with a PC connected to the router and router connected to the modem. usually...
-
WAP54G username help
The username is left blank and password is admin. Thats what is was for mine anyway. If anyone is having issue's with getting...
-
WAG320N Static Route
Again: the WAG320N does not support this kind of setup. It does not allow you to define directly delivered static routes...
-
E4200 Static IP Issues
Haha! Oh man! Late nights just aren't good. I realized my error in the morning. I had previous used the Advanced Routing...
-
IP address? DHCP?
The AM200 is router with integrated modem. That's the main problem. I would recommend only to use a single router.Two recommended...
- Downloads
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your product. The serial number is located right underneath the model number. In this example, the model number of the device is M20.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
E-Series
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Silver
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
-
Wireless Routers with Voice Ports
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
-
Wireless VPN Routers
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PC Card or Card Bus
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PCI Adapter
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
-
USB Wireless Adapter
Step 1:
Look for the sticker around the device.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
-
PCI Adapters
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
SE Switches
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
- Videos
- Live Chat
Guide Me
Get quick solutions and troubleshooting tips.
Hot Topics
Frequently asked questions
Frequently Asked Questions for various Operating Systems
Forums
Downloads
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
Firmware
06/29/2010
Ver.3.05.01
Download
1.51 MB(Firmware)
Release Notes
Setup Wizard
Download
46.5 MB(Setup Wizard)
Firmware
06/29/2010
Ver.3.05.01
Download
1.51 MB(Firmware)
Release Notes
Setup Wizard
Download
46.5 MB(Setup Wizard)
GPL Code Center
Firmware
11/01/2005
Ver.3.04
Download
1.61 MB(Firmware)
Release Notes
Setup Wizard
04/21/2004
Download
13.0 MB(Setup Wizard)
GPL Code Center
Firmware
11/01/2005
Ver.3.04
Download
1.61 MB(Firmware)
Release Notes
GPL Code Center
Firmware
11/01/2005
Ver.3.04
Download
1.61 MB(Firmware)
Release Notes
Setup Wizard
06/10/2004
Ver.2.07
Download
13.0 MB(Setup Wizard)
Firmware Log Viewer
06/01/2004
Ver.Log Viewer
Download
274 KB(Firmware Log Viewer)
GPL Code Center
How to find your model or serial number
To find model or serial numbers, choose your device below.
VALET HOTSPOTS
WIRELESS ROUTERS AND ACCESS POINTS
WIRED ROUTERS
WIRELESS ADAPTERS
WIRED ADAPTERS
SWITCHES
BRIDGES
MEDIA HUB
WIRELESS HOME AUDIO
Forums
-
WAP54G as range expander for E4200
1. You have to run a wire between both and then you can use the WAP54G as second access point.2. The...
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few...
-
Update WAP54G Firmware
Before you download the firmware for your WAP54G you need to be sure whats version of WAP54G you are...
Guide Me
Get quick solutions and troubleshooting tips.
License Agreement
Accept
Do Not Accept