Linksys Support
- Welcome Back,
- Not
- ?
- Sign In
- My Support
- Sign In
Register Your Products Now
Register your Linksys product to stay informed about product updates and warranty information.
Wireless-B PCI Adapter (WMP11)
• Interoperable with 802.11b 2.4GHz- compliant equipment
• Supports Wired Equivalent Privacy (WEP)
• Compatible with Microsoft Windows 98SE, ME, 2000 and XP
• Up to 11 Mbps High-Speed data transfer rate with automatic fallback
Support Sections
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
- Overview
- Guide Me
- FAQs
- Product Information
- Getting to Know the WMP11
- WMP110 FAQs
- Downloadable user guides for Linksys adapters
- Identifying known Linksys network adapters that are compatible with Windows Vista
- Setting up your Adapter
- Installing a wireless USB adapter on a computer with Windows XP operating system
- Installing the WMP11 under Windows XP
- Manually installing the Linksys adapter without the Setup CD
- Encountering Problems when Installing the Linksys Wireless Adapter Drivers
- Downloading the latest driver for your Linksys wireless adapter
- Updating the wireless adapter’s drivers
- How to disable your computer’s wireless connection utility
- Overcoming program compatibility issue in Windows 7
- Connecting computers
- Connecting to a wireless network with SSID Broadcast disabled
- Connecting to a wireless network using the Linksys Wireless Network Monitor
- Connecting to a Wireless Network with SSID Broadcast Disabled using the Linksys Wireless Network Monitor
- No Wireless Connection with WMP11 on Windows XP
- WMP11 good signal, slow speed or no speed
- WMP11 losing a Wireless Signal While Using a Cordless Phone
- Advanced Troubleshooting
- Encountering problems when installing or updating the wireless adapter drivers
- Resolving error 211 – Your adapter may not be installed properly
- Resolving problems with a wireless adapter that cannot be detected by Windows computer
- Resolving an inactive wireless network adapter
- Improving weak signals of network adapters on Windows
- Manually connecting to a wireless network using a computer with Windows OS
- Forums
-
WMP11 works on Vista
I shut the computer down. Installed the adapter & restarted the computer. Once restarted I put in the CD for the driver,...
-
WMP11 card: Code 10.
You need to Update the Drivers for your Wireless Adapter... Download the Drivers from www.linksys.com/downloads. After downloading...
-
WLAN Monitor says WMP11 adapter not installed - but it's working...
If the WLAN Monitor is not working fine, you should use the Windows Wireless Connection to connect to your wireless network... 1)...
-
WMP11 and TKIP
This version can support WPA but you need to install the Odyssey Funk Software.
-
Sharing Printer
Yes, thank you. With some discomfort, I disabled windows xp firewall and McAaffe on both computers. I found the printer,...
-
DHCP assigning IP address
I didn't get what option you want. I'd suggest, you log in to your printer, assign the IP address and that's it. No need...
-
Static IP questions
If you have devices that you can't mess with the IP config on (such as Company laptop) or devices that visit occasionally,...
-
Firewall to router Nat
If you connect a second outer through a LAN port to another (main) router the NAT settings is actually irrelevant. I don't...
-
Internet ip address is internal modem address
As I wrote before: the FritzBox works like a router. Why don't you use the FritzBox as your main router?If you switch the...
-
Adding new computer to existing network
You have to be on the same workgroup.You have to turn on Network Discovery and file sharing in your new computer.
- Downloads
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your product. The serial number is located right underneath the model number. In this example, the model number of the device is M20.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
E-Series
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Silver
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
-
Wireless Routers with Voice Ports
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
-
Wireless VPN Routers
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PC Card or Card Bus
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PCI Adapter
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
-
USB Wireless Adapter
Step 1:
Look for the sticker around the device.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
-
PCI Adapters
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
SE Switches
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
- Videos
- Live Chat
Guide Me
Get quick solutions and troubleshooting tips.
Frequently asked questions
Frequently Asked Questions for various Operating Systems
Forums
Downloads
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
Driver
05/06/2005
Ver.3.1.7.2003
Download
7.79 MB(Driver)
Setup Wizard
Download
32.1 MB(Setup Wizard)
Guides and Information
Driver
11/19/2002
Ver.3.8.28.0
Download
7.15 MB(Driver)
Release Notes
Driver
Ver.3.8.28.0 (Windows ME, 2000, XP)
Download
7.15 MB(Driver)
Guides and Information
How to find your model or serial number
To find model or serial numbers, choose your device below.
VALET HOTSPOTS
WIRELESS ROUTERS AND ACCESS POINTS
WIRED ROUTERS
WIRELESS ADAPTERS
WIRED ADAPTERS
SWITCHES
BRIDGES
MEDIA HUB
WIRELESS HOME AUDIO
Forums
-
WMP11 works on Vista
I shut the computer down. Installed the adapter & restarted the computer. Once restarted I put in...
-
WMP11 card: Code 10.
You need to Update the Drivers for your Wireless Adapter... Download the Drivers from www.linksys.com/downloads....
-
WLAN Monitor says WMP11 adapter not installed - but it's working...
If the WLAN Monitor is not working fine, you should use the Windows Wireless Connection to connect to...
Guide Me
Get quick solutions and troubleshooting tips.
Frequently asked questions
License Agreement
Accept
Do Not Accept