Linksys Support
- Welcome Back,
- Not
- ?
- Sign In
- My Support
- Sign In
Register Your Products Now
Register your Linksys product to stay informed about product updates and warranty information.
Wireless Presentation Player (WPG12)
• Give your presentations wirelessly -- bridges PCs to projectors
• Support for display resolutions up to 1024 x 768 with 24-bit color
• Up to 128-bit WEP Encryption with Passphrase
• Built-in 802.11b wireless Access Point and Presentation Player at the same time
Support Sections
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
- Overview
- Guide Me
- FAQs
- Forums
-
WPG54G display troubles
I've got a WPG54G Presentation adapter that seems to work fine so long as the user is an admin. Any time a regular...
-
WPG54G V3 on Win XP Laptop
Yo, Helm, Your suggestion did the trick. I had to "restore" the Win XP wireless connection zero configuration...
-
WPG54G - Won't refresh display.
Thanks for the advice. I have upgraded to the latest on Lenovo's site but still the same problem. If I go to ATI,...
-
WPG54G V2 Notebook Adapter Software Will Not Load
Greetings. Due to problems with my Compact Presario 1635, Running Windows 98SE. I had to reload my software. All went well...
-
Wired and Wireless - Adding a Second Router
The settings on your wired router should remain the same. All you need to configure is the wireless router. To configure...
-
E4200 Static IP Issues
Haha! Oh man! Late nights just aren't good. I realized my error in the morning. I had previous used the Advanced Routing...
-
Cannot renew ip address
Un-install the adapter software/linksys monitor and install only the drivers... Remove the Linksys Adapter and un-install...
-
Having Trouble With My MTU Settings
Follow this, It will surely work...Open an Internet Explorer browser page.In the address bar type - 192.168.1.1Leave username...
-
VPN attack detected in VPN Log
Yes, we have a VPN tunnel to another RV082 but it is disabled. Could this be the problem Thanks Oliver
- Downloads
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your product. The serial number is located right underneath the model number. In this example, the model number of the device is M20.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
E-Series
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Silver
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
-
Wireless Routers with Voice Ports
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
-
Wireless VPN Routers
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PC Card or Card Bus
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PCI Adapter
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
-
USB Wireless Adapter
Step 1:
Look for the sticker around the device.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
-
PCI Adapters
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
SE Switches
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
- Videos
- Live Chat
Guide Me
Get quick solutions and troubleshooting tips.
Frequently asked questions
Frequently Asked Questions for various Operating Systems
Forums
Downloads
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
No firmware/driver download available
Guides and Information
How to find your model or serial number
To find model or serial numbers, choose your device below.
VALET HOTSPOTS
WIRELESS ROUTERS AND ACCESS POINTS
WIRED ROUTERS
WIRELESS ADAPTERS
WIRED ADAPTERS
SWITCHES
BRIDGES
MEDIA HUB
WIRELESS HOME AUDIO
Forums
-
WPG54G display troubles
I've got a WPG54G Presentation adapter that seems to work fine so long as the user is an admin. Any time a...
-
WPG54G V3 on Win XP Laptop
Yo, Helm, Your suggestion did the trick. I had to "restore" the Win XP wireless...
-
WPG54G - Won't refresh display.
Thanks for the advice. I have upgraded to the latest on Lenovo's site but still the same problem. ...
Guide Me
Get quick solutions and troubleshooting tips.
