Understanding the light behavior of the MR7300 series routers
The Linksys MR7300 series routers are powered by Intelligent Mesh™ technology that adapts to your WiFi needs. This article gives a detailed description of what each light behavior indicates.
Front Panel
| Color | Status | Description |
| Blue | Blinking |
Starting up |
| Solid |
|
|
| Purple | Blinking |
Setup in progress |
| Solid |
Ready for setup |
|
| Red | Blinking |
Disconnected or out of range |
|
||
| Solid | No internet from the modem | |
| Yellow | Solid | Weak connection (for a router in child mode only) |
Wi-Fi Protected Setup™ (WPS) Light
| Color | Status | Description |
| White | Blinking | WPS pairing (only turns ON during WPS pairing, located on the front-right side of the router) |
| Red | Blinking | Connection failed (flashes red, then turns OFF) |
Back Panel
| Light | Color | Activity | Description |
| Ethernet (LAN port) | Green (Link) | OFF | Link is down |
| Solid ON | Device is connected, and Link is up | ||
| Orange (Activity) | OFF | No Tx / RX activities | |
| Flashing | Data transferring in progress | ||
| Internet (WAN port) | Green (Link) | OFF | Link is down |
| Solid ON | Device is connected, and Link is up | ||
| Orange (Activity) | OFF | No Tx / RX activities | |
| Flashing | Data transferring in progress |
For more information, click on the link below:
Linksys MR7350 FAQs
