
HARDWARE INFORMATION
The router has indicator lights that show the activities and status of the device.
SETUP AND INSTALLATION
Open a browser and type in https://linksysxxxxx (the xxxxx refers to the default WiFi name of the router located on the product label. You can also use 192.168.79.1 which is the default IP address of the router. If your router is using a different IP address, use that one instead.
You may come across a warning message; to continue, just follow the instructions displayed on your screen.
WIFI CONNECTION AND SECURITY
ADVANCED CONFIGURATION
Try to perform the steps below:
- Verify that your router power and WiFi status lights are solid blue.
- To assess if you have WiFi range issues, try moving your laptop or mobile device closer to your router.
Below are factors that can cause signal degradation and the steps you can take to resolve these issues.
1. Obstructions between the router and your device such as walls, fixtures, furniture, and metal appliances can weaken the WiFi. It is best to have the router within the line of sight of the clients that will connect to the WiFi.
2. Devices with the same frequency as the router such as baby monitors, microwave ovens, etc. can interfere with the WiFi. You can Turn OFF these devices or relocate your router away from them.
3. Placing the router on the ground. Try to place your router on an elevated surface that is at least 6 ft high.
Try rebooting your modem and router, then wait for a few minutes. If you are still unable to get online, call your internet service provider (ISP) to check for any connectivity issues with the modem.