Overview of the Advanced Setup tab of your Linksys E9450 WiFi 6 Router
The Linksys E9450 WiFi 6 Router features a dual-band technology that delivers extremely fast speed of up to 5.4 Gbps. It also features the next generation WPA3™ Wi-Fi security providing more robust password-based authentication. To know more about the Linksys E9450, click here.
This article is for Linksys E9450-AH, E9450-CN, E9450-JP, and E9450-KR. To learn how to access the web interface of the Linksys E9450, click here. Once you are in the web interface, click on Advanced Setup.
The Advanced Setup tab has the following categories:
This article is for Linksys E9450-AH, E9450-CN, E9450-JP, and E9450-KR. To learn how to access the web interface of the Linksys E9450, click here. Once you are in the web interface, click on Advanced Setup.
The Advanced Setup tab has the following categories:
1. LAN – Displays information about your Local Network and DHCP Server. You can also configure the VLAN and IPv6 settings in this category. To learn how to configure VLAN, click here.
2. VPN – Allows you to configure a PPP over L2TP WAN service.
3. NAT – Configure your Virtual Servers, Port Triggering and DMZ Host of your router.
4. Parental Control – Configure your Parental Control settings through Time Restriction or URL Filter.
5. Routing – Configure Static Route or Routing Information Protocol (RIP) on your router.
6. DNS – Allows you to set up your DNS Server and Dynamic DNS Server configurations.
7. UPnP – Enable Universal Plug and Play (UPnP®) to allow devices connected to your network to easily discover each other and automatically create working configurations.
8. Storage Service – Add User Accounts that can access your storage device.
9. IP Tunnel – Configure IP Tunneling on your router. Currently, only 6rd configuration is supported.
