The Linksys MX42SH-SG WiFi 6 Whole Home Mesh System for StarHub ISP supports the latest Wi-Fi® 6 (802.11ax) standard to deliver next-level streaming and gaming. It offers faster WiFi performance for lag-free online gaming and simultaneous streaming to any device. The Linksys MX4200 is for StarHub ISP subscribers only.

With the powerful WiFi 6 Mesh coverage, this is designed to deliver gigabit WiFi speeds to every corner of your home, including the backyard and outdoor smart home devices.



Features

• 802.11ax 
• Up to 4.2 Gbps
• Tri-Band
• Eight Spatial Streams
• 1.4 GHz quad-core processor
• Intelligent Mesh™
• Easy Setup
• WiFi security
• Seamless Roaming
• Guest Network
• Parental Controls
• Mobile Gaming
• Supports Internet Protocol television (IPTV)
• Coverage of up to 2,700 sq ft per node

Back Panel
 

• Ports:
  • Three gigabit ethernet ports
  • One gigabit internet port
  • Power port (12V, 3A)
  • One USB 3.0 port for external storage support.  The supported formats are as follows:
    • Windows®:  NTFS, FAT32
    • Mac®:  FAT32, and HFS+ (journaled, non-journaled) 
    • Supports SMB v2.0
    • UPnP®
    • Supports up to 900mA current draw
• Buttons and switch
  • Reset button
    
    NOTE:  To reset the node to its factory defaults, press and hold the button first (you will see a bright red flash, followed by three to four quick red faded pulses then another bright red flash), then you can release the button.

• Wi-Fi Protected Setup™ (WPS) button
• One power switch (sliding)

• Weight:  0.95 kg (2.15 lb)
• Dimensions:  4.45 in x 4.45 in x 9.57 in

• A modem or gateway with an active internet connection
• Latest iOS or Android™ mobile device 
• Latest version of the Linksys app 
• Bluetooth® (preferred for setup)

• Linksys MX42SH-SG 
• Quick install guide
• Ethernet cable
• Power adapter 12V, 3A