
HARDWARE INFORMATION
- Quick start guide
- Mounting kit + two screws and two anchors
- Power adapter (120W AC/DC; Single output: 54V DC/2.22A)
For a detailed description of its light behavior, refer to this article.
SETUP AND INSTALLATION
The switch is a DHCP client by default. If the device fails to retrieve an IP address through DHCP, the default IP address is 192.168.1.251, and the factory default subnet mask is 255.255.255.0.
The Linksys LGS310MPC can be placed on a desktop or wall-mounted.
Learn how to reset or reboot your switch.
Learn how to back up and restore your switch’s current configuration.
FIRMWARE UPGRADE
Learn how to upgrade or check the firmware of your switch.
TROUBLESHOOTING
The PoE+ contains PoE subsystem information for monitoring the current power usage and assigns the total amount of power the switch can provide to all of its PoE+ ports.
A virtual LAN (VLAN) is a group of ports that form a logical ethernet segment on a Layer 2 switch, which provides better administration, security, and management of multicast traffic.
Voice VLAN provides Quality of Service (QoS) to VoIP, ensuring that the quality of the call does not deteriorate if the IP traffic is erratic or uneven.
Learn how to configure the IP Settings of the switch.
Learn how to change the switch’s Access Timeout settings.
View an overview of the router's security settings.
Learn how to add users.
Learn how to configure the Access Control (ACL) settings of the switch.
Learn how to configure the Monitor settings of the switch.