Say Hello to the Linksys LGS310C
The Linksys LGS310C is a TAA Compliant, eight-port Managed Gigabit Ethernet Switch with two 1 Gbps SFP Uplinks. It offers a quick and easy solution to extend your office network. It features gigabit speed ports and a web interface for easy configuration and management so that networking devices can be located anywhere without needing alternating current (AC) outlets.
- 802.1q VLAN Tagging
- Static routing
- Access Control List (ACL)
- Internet Group Management Protocol (IGMP) Multicast
- 802.1x RADIUS Authentication
- Port Mirroring
- Link Aggregation
- Port Security
- 802.1p Quality of Service (QoS)
- Bandwidth and Storm Control
- It can be placed on a desktop or wall-mounted
- Indicator lights
- External power supply: 12V, 1A
- Dimensions: 240 mm x 105 mm x 27 mm
- Weight: 609 g (1.34 lb)
- Buttons
- Reset button
- Rocker-style power ON/OFF switch (back panel)
- Ports
- Eight Gigabit ports
- Two SFP 1 Gbps ports
- DC IN 12V power port (back panel)
- Browser requirements:
- Latest Google Chrome™ version (minimum version 80.0 or later)
- Latest Firefox® version (minimum version 72.0 or later)
- Linksys LGS310C
- Quick start guide
- Mounting kit with two screws and two anchors
- Power adapter (12V, 1.0A)
The hardware version is located beside or beneath the model number and is labeled version, ver., or V. If there is no version number beside the model number on your Linksys product, the device is version 1. If you still have trouble finding your version number, see the complete article to learn more.
Updating the firmware of the Linksys LGS310C
1. Create a backup file of your configuration before upgrading the firmware to prevent loss of settings.
2. Download the switch's firmware and log in to its web interface.
3. Click on the menu icon in the upper-left corner.
4. Click on Configure.
5. Select the Firmware or Maintenance tab to upgrade the firmware.
Once the upgrade is done, you can restore your switch's backup configuration. Click More for additional help.
You can unplug the power adapter/cord and reconnect to reboot the switch. Alternatively, you can do it through the web interface by following these steps:
1. Access the web interface of your switch.
2. Click on the avatar of the admin account on the upper-right-hand side and click on Reboot.
3. Click on Apply to proceed or Cancel to abort the process.
Before resetting, create a backup file of your configuration to prevent loss of settings.
The easiest way to reset the switch to its factory default settings is to look for its reset button on the front panel, then press and hold for more than 10 seconds.
You can also do it through the switch's web interface. Follow the steps below:
1. Access the web interface of your switch.
2. Create a backup file of your configuration before the reset to prevent loss of settings.
3. Click on the avatar of the admin account on the upper-right-hand side and click on Reset.
4. Click on Apply to proceed or Cancel to abort the process.
Select each category below to view the articles.
- Linksys LGS310C Frequently Asked Questions
- Linksys TAA-Compliant Switches
- Linksys Managed Gigabit Switch Light Behavior
- Linksys-compatible transceivers from AddOn for Linksys Managed Gigabit Switches FAQs
- Overview of the Security settings of the Linksys Managed Gigabit Switch
- Overview of the Access Control settings of the Linksys Managed Switch for Business
- Overview of the VLAN settings of the Linksys Managed Gigabit Switch
- Overview of the ACL settings of the Linksys Managed Gigabit Switch
- Overview of the Monitoring settings of the Linksys Managed Gigabit Switch
- How to add a user and admin to the Linksys Managed Switch for Business
- How to change the Access Timeout settings of a Linksys Managed Switch for Business
- Configuring the IP Settings on a Linksys Managed Switch for Business
- Configuring the Voice VLAN settings of the Linksys Managed Switch for Business
- Accessing the Menu CLI using the console port on the Linksys Managed Switch for Business
