Linksys LGS328MPC Frequently Asked Questions

Linksys LGS328MPC FAQs

HARDWARE INFORMATION

What is the Linksys LGS328MPC?

The Linksys LGS328MPC 24-Port Managed Gigabit PoE+ Switch with 4 10G SFP+ Uplinks 410W TAA Compliant offers a quick and easy solution to extend your office network. It features gigabit speed ports, a web interface for easy configuration and management, and PoE+ support for networking devices to be located anywhere without the need for alternating current (AC) outlets. Learn more.

What is included in the switch's packaging?

The following are its packaging contents:

Quick start guide
Rack mounting kit + eight screws
Four rubber feet
Power cord (Internal power supply: AC power 100V - 240V AC at 50 Hz - 60 Hz, 7.0A)

What is its PoE+ Power Budget?

The Linksys LGS328MPC has the PoE+ Power Budget of 410W.

What does the light activity on the switch indicate?

Learn more.

SETUP AND INSTALLATION

What is its default IP address?

By default, the switch is a DHCP client. When no DHCP server is detected, it will default to the IP address 192.168.1.251, and the factory default subnet mask is 255.255.255.0.

How do I access its web interface?

Learn more.

Can the switch be rack-mounted or wall-mounted?

The Linksys LGS328MPC can be rack-mounted.

How do I reset or reboot the switch?

Learn more.

How do I back up or restore the switch's configuration?

Learn more.

ADVANCED TROUBLESHOOTING

How do I upgrade or check the switch's firmware?

Learn more.

What is PoE+, and how can I access this on the switch?

The PoE+ contains PoE subsystem information for monitoring the current power usage and assigns the total amount of power the switch can provide to all of its PoE+ ports. Learn more.

What is VLAN, and how do I configure it?

A Virtual LAN (VLAN) is a group of ports that form a logical ethernet segment on a Layer 2 switch, which provides better administration, security, and management of multicast traffic. Learn more.

Can I configure the switch's Voice VLAN settings?

Yes. Voice VLAN provides Quality of Service (QoS) to VoIP, ensuring that the quality of the call does not deteriorate if the IP traffic is erratic or uneven. Learn more.

How do I configure the switch's IP Settings?

To configure the switch's IP settings, follow these instructions.

How do I change the switch's Access Timeout settings?

You can configure this in the switch's web interface. Learn more.

What are the switch's Security settings?

Learn more.

How do I add users to the switch?

You can configure this in the switch's web interface. Follow these instructions.

How do I configure the switch's Access Control settings?

To configure the Access Control settings, follow these steps.

How do I access the switch's virtual port display page?

Learn more.