Linksys LGS310C Frequently Asked Questions

Linksys LGS310C FAQs

HARDWARE INFORMATION

What is the Linksys LGS310C 8-Port Managed Gigabit Ethernet Switch with 2 1G SFP Uplinks TAA Compliant?

The Linksys LGS310C 8-Port Managed Gigabit Ethernet Switch with 2 1G SFP Uplinks TAA Compliant offers a quick and easy solution to extend your office network. It features gigabit speed ports, a web interface for easy configuration, and management for networking devices to be located anywhere without the need for alternating current (AC) outlets.

What are its package contents?

The following are its packaging contents:

One Linksys LGS310C
Quick start guide
Mounting kit (includes two screws and two anchors)
Power adapter (12V, 1A)

What does the light activity on the switch indicate?

Here is a detailed description of its light behavior.

SETUP AND INSTALLATION

What is its default IP address?

The switch is a DHCP client by default. If the device fails to retrieve an IP address through DHCP, the default IP address is 192.168.1.251 and the factory default subnet mask is 255.255.255.0.

How do I access its web interface?

To access the switch’s web interface, follow these steps.

Can the switch be rack-mounted or wall-mounted?

The Linksys LGS310C can be placed on a desktop or wall mounted.

How do I reset or reboot the switch?

View the steps to reset or reboot your switch.

How do I back up or restore the switch's configuration?

For instructions on backing up and restoring your switch’s current configuration, follow these steps.

ADVANCED TROUBLESHOOTING

What is VLAN and how do I configure it on the switch?

A Virtual LAN (VLAN) is a group of ports that form a logical ethernet segment on a Layer 2 switch which provides better administration, security, and management of multicast traffic.

How do I configure the Voice VLAN settings of the switch?

Voice VLAN provides Quality of Service (QoS) to Voice over Internet Protocol (VoIP), ensuring that the quality of the call does not deteriorate if the IP traffic is erratic or uneven.

How do I configure the IP Settings of the switch?

To configure the IP Settings of the switch, follow these steps.

How do I change the switch's Access timeout settings?

To change the switch’s Access timeout settings, follow these steps.

What are the Security settings of the switch?

View an overview of the router's Security settings.

How do I add users to the switch?

For instructions on how to add users, follow these steps.

How do I configure the ACL settings of the switch?

To configure the ACL settings of the switch, follow these steps.

How do I configure the Monitor settings of the switch?

To configure the Monitor settings of the switch, follow these steps.