Linksys SE3008 FAQs
HARDWARE INFORMATION
What is the Linksys SE3008?
The Linksys SE3008 is an unmanaged switch that offers a quick and easy solution to extend your office network with a plug-and-play installation. It is also useful in transferring data across a local network at up to gigabit speeds.
What is the difference between the Linksys SE3008 8 and SE3008 v2?
The difference between the Linksys SE3008 and SE3008 v2 is listed below:
| Feature | SE3008 | SE3008 v2 |
| Power | 5 V / 1 A | 12 V / 0.5 A |
| Dimensions | 154 mm x 85 mm x 26 mm | 168 mm x 90 mm x 26 mm |
| Weight | 340 g | 358 g |
| Indicator Lights | Front | Front |
| LAN Ports | Back | Front |
What is Quality of Service (QoS)?
Quality of Service (QoS) is used to set up priority and attention to specific devices, services or applications within the network through the router, so that the maximum amount of available throughput and speed can be used for better audio and video streaming.
Is the Linksys SE3008 a gigabit switch?
Yes, it is a gigabit switch because it supports up to 1000 Mbps speed.
What is its warranty period?
The Linksys SE3008 has a 1-year limited warranty.
What is the maximum throughput of the Linksys SE3008?
The maximum throughput that the switch can accommodate is 1 Gbps.
What type of power adapter does the Linksys SE3008 require?
The switch includes an external power adapter of 5 V, 1 A.
Can I wall-mount the Linksys SE3008?
Yes, it can be wall-mounted.
ADVANCED TROUBLESHOOTING
What is the advantage of having a switch when it comes to data transfer?
The switch acts as a repeater which regenerates data signals as they pass through it. This feature acts as a safeguard to deter data loss and ensure that transmissions arrive securely at their destinations. Moreover, a switch is capable of intelligent filtering of data based on source and destination as compared to the repeater which can only regenerate the signal without checking its recipients.
What are the protocols supported by the Linksys SE3008?
The switch is compliant with IEEE 802.3, 802.3u, 802.3x, 802.3ab, and 802.3az standards.
What devices can I connect to the switch?
You can connect up to eight ethernet devices such as computers, storage, gaming devices, and printers. You can also cascade other networking devices like a switch or router to further expand your network.
When I connect a computer to the Linksys SE3008, will it have internet access as well?
Yes. If the switch is connected to a router, computers connected to the switch will have internet access.
Only routers or modems with DHCP capabilities can allow sharing of internet connection between computers.
What should I do when my computer cannot connect to the internet while connected to the Linksys SE3008?
Follow the steps provided below to resolve this issue:
1. Verify if LEDs are properly lit on the switch.
- System LED - Blue
- Link / Act - Green - Orange
2. Power OFF the switch and the computer.
3. Power ON the switch.
4. Power ON the computer.
Only routers or modems with DHCP capabilities can allow sharing of internet connection between computers.
What should I do if the Linksys SE3008 experiences excessive data collisions?
Verify that your network cabling is securely crimped and installed properly.
