In the Instant-Devices section of the Linksys Now, you can see all of your devices connected to the network.
To access this section, follow these steps:
1. Log in to the web interface.
2. Click on Menu.
3. Click on Instant-Devices.
Use the filters on the left-hand side to display devices by connection, node, or radio.
Clicking on the arrows 
icon will steer the client to a better radio if available. For example, if you see a client with a low signal, click on the arrows icon to disconnect it, and the client will connect to the node with the strongest signal.
To see details about a specific device, click on it. To rename a device, click on the 
icon to better identify it in the network.
To reserve an IP address for a client, click on the device and then click on Reserve IP. To remove the DHCP reservation, click Release Reserved IP.
To assign a specific IP address, write down the MAC address of the client, then go to Advanced Settings.
