The Incredible-WiFi section provides easy access to essential network customization options. You can update your WiFi name and password, modify advanced settings, set up a Guest network, and fine-tune additional configuration to suit your needs.
Supported models:
- LN1600 series
- SPNM60, SPNM62
To configure settings on this tile, follow these steps:
1. Log in to the router's web interface.
2. Click on the Menu tab.
3. Click on the Incredible-WiFi tile and configure the necessary settings by clicking on the edit icon. Then, make sure to click Save to apply your changes.
If your model supports the Quick Setup option, you can use this option to rename all your radios using the same WiFi name, password, and security, except the Guest network.
Settings may vary by model.
SPNM60 and SPNM62
By default, Quick Setup is enabled. Customize your personal WiFi radios with the same name and security at the same time, then click Save.
If you need to enable the Guest network, give this network a different name and password.
To customize your WiFi radios with unique names or other advanced settings, disable Quick Setup. Make sure to click Save to apply changes.
LN1600
Under this section, there are three sub-categories, and these are WiFi, Advanced, and MAC Filtering.
In the WiFi tab, you can:
- Customize your WiFi settings, including the Guest network.
- Update the WiFi name and password.
- Adjust security settings and much more.
Supported Security Settings:
The default security setting is WPA2 Personal for backward compatibility. If you have devices that support WPA3™, you can change it to WPA2/WPA3 Mixed Personal or higher.
The Guest network is disabled by default. Enable it to share your Guest WiFi with your visitors without giving out your primary home network credentials. This helps keep your primary devices secure.
Give the Guest network a unique name and a password to share with your guests. The Guest network uses the same security that is set for all radios.
Toggle the switch to enable the Guest feature. Click the edit icon and set the Guest WiFi name and password. Make sure to hit Save to apply changes.
In this section, you can configure other advanced WiFi settings:
Learn how to enable MLO.
MAC Filtering is used to deny access to specific devices on the WiFi network. It is recommended to verify the MAC address of your device to confirm the setting.
If the client device has a Private Wi-Fi Address or Random MAC enabled, which changes its MAC address at various times, the device will not follow the Deny rule, and the device will be allowed on the network due to the device using a different MAC address.
To check or change this setting on your device, click here for iOS devices or click here for Android™ devices.
Follow these instructions to configure MAC Filtering.
1. Toggle to enable WiFi MAC Filtering.
2. Click on the arrow icon.
3. Select either of the two options:
- a. Select from my device list - Select a device and click Add.
- b. Manually add device - Enter the MAC address of a device in this format xx:xx:xx:xx:xx and click Save.
4. Click Done.
5. Click Save.
6. Click Turn On when prompted.
When MAC Filtering is enabled, you will see the following:
To turn OFF MAC Filtering or to remove a device, follow these instructions:
1. To turn it OFF, toggle the MAC Filtering to the OFF position and then click Save.
2. Click Turn Off when prompted.
3. To remove a device from MAC Filtering, click the Devices section
4. Click Edit and select the device you want to remove from the list. Click Remove.
5. Click Done.
6. Click Save.
