Overview of the Administration page of the Linksys RE7350 and RE7310
This article gives you an overview of the Administration settings for the Linksys RE7350 Max-Stream™ WiFi 6 Range Extender and Linksys RE7310 MAX-STREAM™ WiFi 6 Range Extender. To use this feature, access the web interface of your range extender. For instructions, click here.
The table below shows the settings that can be configured under Administration:
The table below shows the settings that can be configured under Administration:
|
Feature
|
Description
|
|
Management
|
This is available in both Access Point and Range Extender modes. This is where you can change the range extender’s admin password, change or add a password hint, and backup or restore the configuration file for the range extender.
 |
|
Log
|
This is available in both Access Point and Range Extender modes. You can select View Log to view the log and save the file in .txt format.
NOTE: Logs are disabled by default.  |
|
Diagnostics
|
This is available in both Access Point and Range Extender modes. You can use this tool to check your ping.
 |
|
Factory Defaults
|
This is available in both Access Point and Range Extender modes. This feature allows you to restore all settings to factory default values.
|
| Firmware Upgrade |
This auto-detects if a new firmware is available. You can also uncheck the Auto update box to stop auto detection. If a firmware is available, select Upgrade to proceed.
NOTE: Manual firmware update supported.  |
