This article will teach you how to set up the Linksys SPNMX42K9-UK for Kloud9 subscribers in the UK.

Before you begin:
 

• Write down the WiFi name and password (case-sensitive) located on the product label.
• Auto Configuration Server (ACS) support - This model supports Automatic Setup, meaning that once the node is plugged into Kloud9’s equipment, and it detects an internet connection, the node will automatically set itself up as a parent node. The light will start to flash in white. Once it has configured itself as a parent, the light will turn solid blue.
• Do not set up the node with the Linksys app. During ACS setup, the app will fail to detect the node and wait until the node has finished the process.

Directions:
 
1. Power ON the node and connect an ethernet cable from your Linksys node’s internet port to the Kloud9 equipment.

2. Wait a few minutes, and the light will start to flash. After a few minutes, the light will turn solid blue, which means that the parent node is online and ready to use. Here is a chart of the node’s light behavior. 

3. You can now connect your wireless clients to your WiFi network. Make sure to connect your mobile device to the Linksys router’s WiFi name. The WiFi credentials are located on the product label.

4. After the node is online, you can manage the node with the Linksys app.


Find out more:

Adding a child node to an existing Linksys Mesh system