Linksys MR2000 FAQs
HARDWARE INFORMATION
What is the Linksys MR2000?
The Linksys MR2000 is a dual-band mesh Wi-Fi® router. It offers Intelligent Mesh™ technology and provides you with ultra-fast WiFi to keep your connection going strong.
What is Wi-Fi 6?
Wi-Fi 6 is based on the 802.11ax technology that delivers more speed, coverage, and capacity than previous standards. It allows you to have gigabit speeds for a faster connection to handle all the latest streaming, gaming, and mobile technology.
Where can I find the router’s serial and model numbers?
You can find the serial and model numbers on the product label.
What is the warranty on the router?
The warranty period is dependent on the country of purchase.
What do the light behaviors of the router indicate?
The light indicates the different states and activities of the router.
Can the router be wall-mounted?
Yes. You can mount the router to the wall or set it on a desk.
What can I plug into the router's USB port?
The Linksys MR2000 has one USB 3.0 port for external storage devices only. This feature is only supported on the parent router. If you connect a USB drive to a router used as a child node, the drive will not be detected.
SETUP AND INSTALLATION
How do I set up the router?
What are the requirements in setting up the router?
Below are the requirements for setting up the Linksys MR2000:
- Internet connection
- Latest version of the Linksys app
- Linksys cloud account for remote access
How do I access the router's dashboard?
What is the router's default WiFi name and password?
The default WiFi name is _LinksysSetupxxx (the xxx is the last three characters of the router’s MAC address). Each node has a unique pre-assigned WiFi password located at the bottom of the router.
What is the router's default administrative password?
The default password of an unconfigured router is admin.
How do I add another router to my network?
How do I reset the router to factory defaults?
There are two ways to reset the router to factory defaults:
- Hardware reset – Press and hold the reset button until you see a fourth red light flash.
- Software reset – Log in to your Linksys cloud account to access the router's web interface. Under Router Settings, click Troubleshooting > Diagnostics, then, click Reset under Factory reset.
Is the Linksys Mesh WiFi system compatible with Starlink?
Yes. For the Linksys router to work with Starlink, you will need a Starlink ethernet adapter which you can find in the Starlink shop. Connect one end of the ethernet cable to the Starlink ethernet adapter and the other end to the Internet port of your Linksys router. Learn how to set up the Linksys router with Starlink
WIFI AND SECURITY
What WiFi security modes does the router support?
The router supports the following security settings:
- WPA2™/WPA3™ Mixed Personal
- WPA3 Personal Only
- WPA2 Personal
- Enhanced Open Only
- Open and Enhanced Open
- Open
Does the router support Parental Controls?
Yes, the router supports the free basic Parental Controls feature.
ADVANCED TROUBLESHOOTING
How do I upgrade the router’s firmware?
By default, the Automatic Firmware Update feature on the router is enabled and will upgrade the firmware whenever a new version is available. If you disable the Automatic Firmware Update option on the Linksys app, you will get a prompt whenever a new firmware release is available. When this happens, select Update Available to upgrade the firmware.
Does the router support bridge mode?
How do I access the storage device connected to the router?
To access the storage device connected to your node, you need to first identify its IP address.
Can I connect a USB printer to the router?
No, this is not supported.
How do I safely eject my hard drive from the router?
To safely remove the storage device, click Eject on the External Storage page on the router's web interface or the Linksys app.
How do I secure my hard drive from unauthorized access?
You can enable the Authentication option for the external storage device and enter the following information:
- Username – use a minimum of four and maximum of 12 alphanumeric characters.
- Password – use a minimum of four and maximum of 50 alphanumeric characters
The characters for the username and password must be alphanumeric or include valid characters like “_” or “-“.
What file system formats does the External Storage feature support?
The router supports NTFS, FAT32, FAT, and HFS+.
Can I connect a USB storage device to the router and manage it as an FTP server or media server?
No, this is not supported.
What is Dynamic Frequency Selection (DFS)?
Dynamic Frequency Selection (DFS) is a spectrum-sharing mechanism that allows multiple WiFi networks to coexist with radar systems. It automatically selects a frequency that does not interfere with certain radar systems while operating in the 5 GHz band. The benefits of using DFS channels are less WiFi interference and better WiFi performance.
How do I enable the DFS feature of the router?
Can I use DFS in my network with other routers on child modes?
No. If your other routers on child modes do not support DFS, the routers will have connectivity problems.
I have turned ON DFS channels and I am experiencing WiFi disconnection at times, how can I resolve this?
If the router detects other devices using DFS channels such as radar systems near your location, your router will choose another channel to use and this will cause a momentary WiFi disconnection. To avoid this, you can turn OFF DFS.
Can my clients connect to a DFS channel?
Only if your clients support DFS channels. If your clients do not support DFS channels, they can connect to the 2.4 GHz band instead.
My Linksys mesh router isn't working with my service provider's 5G router. What should I do?
For the Linksys mesh router to work with a 5G router, your provider must provide a 5G router with an ethernet port for connection to the parent node.
Does this support IPv6 RD for its internet connection?
Yes. It supports IPv6 RD and 6to4 tunneling.
