You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Product Overviews > Mesh Systems > Overview of the External Storage feature of the Linksys Intelligent Mesh system
Overview of the External Storage feature of the Linksys Intelligent Mesh system
print icon
The External Storage feature of the Linksys Intelligent Mesh™ system allows you to connect an external storage device to the USB port on the router and share the entire drive. This article will provide an overview of this feature. 

Before you begin:

 

  • This feature supports external USB drives only.
  • Some Linksys routers or nodes support the USB feature on the parent node only and not on the child node.

 


 


 

Linksys app view

The External Storage feature has been discontinued on the latest Linksys app, but you can still use the External Storage section on the router's web interface to set up and manage your storage device.

 

LinksysSmartWiFi.com page view

1. Log in to your router via a web browser.

2. Click on External Storage.




3. Configure your settings and click Apply to save.


 
Feature
Description
Drive information
In this section, you will see the drive connected to your Linksys router. You will see the IP address of the router, this is what you can use to access the drive from your Linksys network.



Some Linksys routers support the USB feature on child nodes as well. If you have a second USB drive connected to a child node, you will see the following image. Notice each drive has a different IP address to access.



Click Eject  to safely eject your hard drive. If you have more than one USB drive connected to other routers in your network, you will have one Eject button for each drive.
Network File Sharing (SMB)
The steps on how to access your drive are provided in this section. 
Authentication By default, authentication is turned OFF. To add a password when attempting to access the hard drive, turn this feature ON and create a username and password.

Authentication requirements:

 
  • Username - Minimum of four characters, maximum of 12 characters. The characters must be alphanumeric or include valid characters such as an underscore ( _ ) or a dash ( - ).
  • Password - Minimum of four characters, maximum of 50 characters. The characters must be alphanumeric or include valid characters such as an underscore ( _ ) or a dash ( - ).
 
 

How to access your drive

Most Linksys Intelligent Mesh systems support SMB v2.0.

To access the storage drive, you will need the IP address of the hard drive as mentioned in the
drive information section of the chart.

In this article, we are using 192.168.1.1 as an example. Steps may vary depending on the version of your computer's operating system.




For Windows® computers:

Enter “\\” followed by the drive's IP address in the Windows Explorer field (example: \\192.168.1.1), then press [ENTER]. If you enabled authentication, enter the drive’s username and password.




For Mac® computers:

Open Go > Connect to Server. In the Server Address field, enter “smb://” followed by the drive's IP address, then click Connect. If you enabled authentication, enter the drive's username and password.
 
Was this support article useful?
0 out of 1 found this helpful

Contact Us:
Call Us Access our list of global support numbers
Reddit Join and subscribe to our Official Reddit Community
Chat Us We are here to help you with all the questions you have
scroll to top icon