HARDWARE INFORMATION
The package contents are the following:
- One Linksys MBE70
- Quick Start Guide
- One ethernet cable
- Power adapter (12V, 2.5A)
It has the following ports:
- One 2.5 Gbps internet port
- Four ethernet ports (1 Gigabit each port)
- Power port
These are as follows:
- Dimensions (L x W x H): 3.744 in x 3.744 in x 8.58 in
- Weight: 2.096 lb
SETUP AND INSTALLATION
All you need is an active internet connection.
The default settings are as follows:
- The default IP address is 192.168.1.1.
- The default WiFi name is Linksysxxxxx, where xxxxx represents the last five characters of the router’s serial number.
- The default admin password is the same as the default WiFi password located at the bottom of the router.
FEATURES AND FUNCTIONS
Yes. The admin password can be changed in the router’s web interface. Follow these instructions
ADVANCED TROUBLESHOOTING
Yes. Learn more.
No. WPS is not supported.
For advanced configuration steps or further details, visit OpenWrt.org or the OpenWRT User guide.
The default IP address for the Linksys MBE70 is 192.168.1.1. If your upstream network also uses the 192.168.1.x range, you'll need to change the Linksys MBE70's IP address. Start by disconnecting the internet cable from the router, then access the web interface to modify the settings.
To enable SSH Access, go to the System menu and select the SSH Access tab. Review and adjust your settings as needed, then click Save & Apply to confirm. Additionally, you can manage SSH keys by clicking on the SSH-Keys tab and adding a new key if required.
Make sure your devices are Wi-Fi® 6e compatible to connect to the 6 GHz network. If they are, try renaming the wifi2 SSID for troubleshooting purposes. Additionally, consider either restarting the 6 GHz radio or bringing your devices closer to the router to enhance connectivity. Refer to the Wireless section in the router's interface for detailed WiFi settings configuration. Learn more.
