How to log in to the Linksys Cognitive Mesh node through a web browser

This article will teach you how to log in to your network settings using a web browser. A desktop computer is required.

This article applies to the following models:

- Linksys MBE7000 series
- Linksys MX6200 series
- Linksys LN1100 series
- Linksys LN1400

1. Connect a desktop computer to the WiFi name of your Linksys network.

2. Open a web browser and enter "www.myrouter.info" or "myrouter.info" into the Address bar and press [ENTER].

You can also log in using the default IP address of the router, which is https://192.168.1.1. If you have a Linksys MBE7000PW-HK or LN1400PW-HK provided by PCCW ISP and you have enabled the IPTV feature, use https://192.168.10.1.

3. If you receive a browser error message, follow these steps to resolve this issue.

A screenshot of the browser error message from Linksys

4. Some routers have a blocking page. If you get the following screen, click on the mobile image to bypass the blocking page.

A screenshot of the blocking page with mobile images of the Linksys app

If you see the following screen instead, it means the router was set up, but the Plug-and-Play wizard was not completed. You need to complete the wizard before you can log in.

Welcome screen to input your router password credentials with Next button

5. In the Access Router section, enter your router’s password and click Sign In.

If you haven’t customized the password or you have forgotten the password, click on Reset password to recover it. You will need the Recovery Key located at the bottom of the Linksys router that is connected to your modem.

You should now have accessed the local web interface.

Linksys Smart Wi-Fi main dashboard