How to access a Linksys E9450 child node

This article will show you how to access your Linksys E9450 WiFi 6 Router as the child node.

This article is for Linksys E9450-AH, Linksys E9450-CN, Linksys E9450-JP, and Linksys E9450-KR.

Before you begin:

Any changes that are needed, such as WiFi settings, should be made on the parent node.
For troubleshooting purposes, you can access the child node to confirm the firmware version or update the firmware on the child node.

Directions

1. Log in to the parent node.

2. Go to General > Mesh Setup. The IP address of the child node appears under the Connected child node information section.

The web interface for a Linksys E9450 Wi-Fi Router showing the Mesh Setup page under the General settings tab, with the node type set to "Parent Node" and mesh parent mode status as "Enabled".

3. Under Connected child node information, click the IP address that corresponds to the child node you want to access, and log in using the same username and password as the parent node. You should now be logged in to the child node.

The web interface for a Linksys router showing the Device Info page under the Summary tab, displaying details such as firmware version, uptime, serial number, and a connected Internet Status.

How to access a Linksys E9450 child node

Was this support article helpful?