This article provides an overview of the Disk settings of the Linksys E7350 AX1800 Dual-Band WiFi 6 Router.

The USB storage feature is only supported on the parent Linksys E7350 (the router connected to your modem).

To access this feature, follow the instructions below:

1. Access the web interface of your router. For instructions, click here.

2. Under the  tab, click on External Storage.

3. Click on Disk.

The table below shows the settings that can be configured under Disk:
 

Feature	Description
Disk1	Below are the default settings when no drives are attached: The Linksys E7350 supports the following file systems: FAT, FAT32, NTFS, and HFS+ journaled and non-journaled.
Create Share	Click to create a Share on the drive or you can also share the entire partition. For instructions, click here.
Safely Remove Disk	Before disconnecting a USB disk from the router, click Safely Remove Disk first. This prevents the possible loss of data, which may occur if you remove the disk while it is transferring data.
Shared Folder	Router Name - The device name (or NetBIOS name) of the router is displayed. You can always change the name by going to Configuration > Connectivity > Local Network. Shared Disk IP Address - The IP address of the disk is displayed.
Share List	Click Summary to view a list of Shared Folders. Click Edit to change the access settings of a Shared Folder.  Click Delete to delete a Shared Folder.
Format Disk	If you would like to format a disk as FAT32, check the box of the disk you want to format then click Format Disk. If your disk was formatted with multiple partitions, then the formatting will delete them and create a single partition. Check the box and click Format Disk.   Read the warning and click OK to proceed.   Enter a name for the partition then click Format.
Refresh	Click to refresh the External Storage screen.