Overview of the Engineer page of the Linksys FGMM1000 and FGMM601
The Engineer page in the web interface of the Linksys FGMM1000 5G WiFi 6 Industrial Router and Linksys FGMM601 5G Outdoor Router is only available when you log in as an administrator. To access this page, click here for instructions. Then, go to Engineer.
NOTE: The Engineer settings are only available under the administrator login. If you are not the administrator of this router, contact the administrator.
NOTE: The Engineer settings are only available under the administrator login. If you are not the administrator of this router, contact the administrator.
Overview of the Engineer page
|
Feature
|
Description
|
|
System log
|
Capture syslogs in the System log page.  Scroll down the page to capture and download the logs.  |
|
Configuration
|
On the Configuration page, click on Edit to configure the settings as needed.  |
|
Super Console
|
The Super Console window allows you to send and run commands on the router. Make sure to click on APPLY to save your changes.  |
|
Cell Selection
|
Configure the Frequency Settings for LTE and NR bands under the Cell Selection page. Select the bands to be used or you may Check All or Uncheck All the boxes when applicable. Click on Apply to save changes. NOTE: Cell selections will vary by the SIM card carrier.  |
