Overview of the Dashboard page of the Linksys FGMM1000 and FGMM601

The Dashboard page in the web interface of the Linksys FGMM1000 5G WiFi 6 Industrial Router and Linksys FGMM601 5G Outdoor Router provides a snapshot of your network. To access this page, log in to the Linksys router's web interface.

Linksys FGMM1000

Linksys FGMM601

Feature	Description
5G WiFi 6 Industrial Router / 5G Outdoor Data Unit	The status of your internet connection appears on the 5G WiFi 6 Industrial Router or 5G Outdoor Data Unit section. WAN/LAN status - This means the device has internet connection. - There is no internet connection. Make sure a SIM card is properly inserted into the SIM slot. - A WiFi or ethernet client is connected to the router. - No clients are currently connected to the router. - The SIM card is either not detected or connected. Make sure a SIM card is properly inserted into the SIM slot. LAN IP Address - This displays the current IP address of your router. WIFI - This displays the WiFi bands. This only applies to Linksys FGMM1000. Up Time - This displays how long your router has been ON since the last reboot or restart. Connected Device - This displays the total number of clients currently connected to your router. New firmware available - This message will only appear if there is a new firmware available. Learn how to upgrade the firmware.
Health Check	This feature is available when logged in as administrator. Software Service can be used by an administrator for debugging.
Cellular Connection	The Cellular Connection section gives a summary of your current cellular connection status including the WAN information.
Serial Connection	The Serial Connection section provides you with the current serial port settings. Learn how to enable the serial ports. NOTE: This only applies to Linksys FGMM1000.
Device Info	You can view the router’s information on the Device Info section.

Support

Company