The Linksys MX4200 v2 WiFi 6 Whole Home Mesh System supports the latest WiFi® 6 (802.11ax) standard to deliver next-level streaming and gaming. It offers faster WiFi performance for lag-free online gaming and simultaneous streaming to any device.

With the powerful WiFi 6 Mesh coverage, this is designed to deliver gigabit WiFi speeds to every corner of your home, including the backyard and outdoor smart home devices.
 

Features
 

• IEEE 802.11ax
• Tri-band 
• Eight Spatial Streams
• Apple® HomeKit®
• Next-generation Orthogonal Frequency-Division Multiple Access (OFDMA) technology
• 1.4 GHz quad-core processor
• Intelligent Mesh™
• Easy Setup 
• WiFi security
• Seamless Roaming
• Guest network
• Parental Controls
• Supports 20 MHz, 40 MHz, and 80 MHz wide channels
• Coverage of up to 2,700 sq ft per node

• Ports:
  • Three gigabit ethernet ports
  • One gigabit internet port
  • Power port (12V, 3A)
  • One USB 3.0 port for external storage support.  The supported formats are as follows:
    • Windows®:  NTFS, FAT32
    • Mac®:  FAT32, and HFS+ (journaled, non-journaled)
  • Supports SMB v2.0
  • UPnP®
  • Supports up to 900 mA current draw

• Buttons and switch
  • Reset button
    ​​​​​​​NOTE:  To reset the node to its factory defaults, press and hold the button first (you will see a bright red flash, followed by three to four quick red faded pulses then another bright red flash), then you can release the button.
  • Wi-Fi Protected Setup™ (WPS) button
  • One power switch (sliding)
  • Weight:  0.94 kg (2.15 lbs)
  • Dimensions:  4.45 in x 4.45 in x 9.57 in

Setup requirements
 

• A modem or gateway with an active internet connection
• The latest version of the Linksys app
• Latest iOS or Android™ device 
• Bluetooth® (preferred for setup)
• Apple Home app (For HomeKit feature)

• Linksys MX4000 v2 (three-pack, two-pack, or one-pack)
• Ethernet cable (one for each node)
• Power adapter (one for each node)
• Quick installation guide