Connecting an Apple TV® to your Linksys Velop

Apple TV® lets you stream movies, sports, music and more in your TV from your network. Also, it lets you mirror the contents of your Mac® or iOS device.

This article will teach you how to connect an Apple TV to the network of your Linksys Velop.

Requirements:

An Apple TV set up and configured to your TV
Your Wi-Fi settings

Directions

Wireless Connection
Wired Connection

Wireless Connection

1. Turn ON your TV and plug your Apple TV device to the power outlet.

2. On the Home screen, select Settings > Network.

NOTE: Apple TV cannot connect to networks that require additional or secondary login (e.g. captive networks).

3. Select the name of your Wi-Fi and enter your password when prompted. To know the wireless settings of your Linksys Velop, you need to access the Linksys Velop dashboard and tap your Wi-Fi name under Wi-Fi. To know more about the Linksys Velop dashboard, click here.

Wired Connection

Before you begin, you will need the following:

An Apple TV set up and configured to your TV
An ethernet cable

1. Turn on your TV and plug your Apple TV device to the power outlet.

2. Connect your Apple TV to your Linksys Velop using an ethernet cable.

3. Wait for your Apple TV to activate. Once activated, follow the on-screen instructions.

NOTE: If you have issues connecting your device to your Linksys Velop, you may click here.

Congratulations, you have now successfully connected your Apple TV to your network.